UCaaS Cordless Base

How to reset and register a W60 cordless handset to its base station, plus base station GUI access.

Updated Oct 22, 20262 min readucaas stationwireless base

Reset W60 Phone

Labels are:

  1. Phone synced to base station
  2. Base station is on the network
  3. Power button

To register a new handset manually:

When the handset LCD screen prompts "Press base page 2s then press Reg.", long press on the base station till the registration LED flashes.

Easy Registration:

  1. Press the Reg soft key on the handset to register quickly.

Normal Registration:

  1. Press the OK soft key on the handset, and then select Register Handset.
  2. Select the desired base and then press the OK soft key. The handset begins searching the base.
  3. Press the OK soft key after searching a base successfully.
  4. Enter the admin PIN from SophicX Lock. Then press the Done soft key to complete registration. After success, the handset LCD screen prompts "Handset Subscribed" and "Base NO. (last 4 characters of connected Base's MAC address)". An icon with internal handset number and handset name appears on the LCD screen.

Phone will sync to the base station if the light is red or clear, then it has lost its configuration. If the light turns green the phone is synced to the base station and should be able to make calls.

If this does not happen, hold down the WIFI Signal until the green light starts to flash — it will look for the phone and should sync. Make a test call after phone states "Registered". All 3 lights should be green for the phone to work.

Accessing the Base Station GUI

  1. On the phone main screen, hit OK.
  2. Tap on the Status Icon.
  3. Select Base. The phone will give an IP address (e.g. 192.168.254.111).
  4. Put the IP in a web browser.
  5. Type Username: admin and Password: 5f36f1bd.
  6. It will take you to the main screen in the GUI. Click on Account on the left-hand side, then click on Number Assignment.

Related articles